Dry Lake II wind farm is situated in Arizona, USA. It was in fact brought online in 2011 and is owned by Iberdrola.
It is near Near to Snowflake.
See below for data.
Generally speaking, economic wind generators require a wind speed of 4.5 m/s (16 km/h) or higher.
An ideal location for a project like Dry Lake II might have a near constant flow of non-turbulent wind all year round, with a minimum chances of sudden effective bursts of wind. Additionally, you would not get a turbine Iberdrola like Iberdrola associated if Dry Lake II was not built near local demand or transmission capaNear to Snowflake.
During the planning stages the Dry Lake II wind farm would have been checked and authenticated through wind measurements. However, Dry Lake II wind farm might have needed more than simply meteorological data and measurements.
Site information around Near to Snowflake is a major aspect in the development final decision Winds around Near to Snowflake are examined for over a year or so plus the development of detailed maps. Only then are wind turbines installed.
The wind blows quicker at greater altitudes due to the reduced effect of drag. The rise in velocity with altitude is most spectacular at the surface and is affected by geography, surface roughness, and upwind obstacles such as trees or buildings. Velocity grows with altitude and it is more obvious near land and is altered by topography, surface and hurdles.
Wind speeds raising with altitude is part of a wind energy law. This anticipates wind speed rises with the 7th root of altitude. Increasing the elevation of a turbine, then, enhances the anticipated wind speeds by 10%, and the anticipated power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they are spaced out so they really don’t affect one another. However this might not be the way it is in hilly areas.
Dry Lake II turbines are connected via medium voltage lines and communications.
At a substation, it medium-voltage electric current is increased in voltage using a transformer for link with the high voltage transmission system. Construction of a land-based wind farm requires installation of the collector system and substation, and probably roads to each turbine site.