Diamond Willow wind project was installed in Montana, USA It was in fact brought online in 2008 and is owned by Montana-Dakota Utilities Company.
It is near Baker.
See below for data.
Wind farms, as a general rule need wind speeds of 4.5 metres per second or higher.
The very best destination for something like Diamond Willow would be a steady supply of non-turbulent wind. An important factor of turbine siting is moreover admission to local demand or transmission capaBaker.
During the planning stages the Diamond Willow wind farm would’ve been checked and authenticated through wind measurements. Meteorological wind data alone is usually not enough for exact siting of a large wind power project.
Assortment of site-specific data for wind speed and direction would have been crucial to determining site potential as a way to fund the project. Winds around Baker are evaluated for over a year or so alongside the creation of detailed maps. Only then are wind turbines installed.
The wind blows speedier at higher altitudes due to the reduced influence of drag. The boost in velocity with altitude is most dramatic close to the surface and is impacted by geography, surface roughness, and upwind obstacles such as trees or buildings. Velocity increases with altitude and it is more distinct near land and is changed by landscape, surface and hurdles.
Sometimes, the growth of wind speeds with increasing height follows a wind profile power law, which forecasts that wind speed rises proportionately to the seventh root of altitude. Increasing the elevation of a turbine, then, increases the predicted wind speeds by 10%, and the expected power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they’re spaced out so they really don’t affect each other. However this isn’t necessarily the case in hilly areas.
Individual turbines at Diamond Willow are interconnected with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, this particular medium-voltage electric energy is elevated in voltage with a transformer for link with the high voltage transmission system. Construction of a land-based wind farm requires setting up the collector system and substation, and perhaps access roads to each turbine site.
Facts about Diamond Willow wind farm
- Name: Diamond Willow
- Wind turbine Supplier: Suzlon Energy, Model: 1.5MW, Units: 2,
- Country: USA
- Developer: Crownbutte Wind Power
- State: Montana
- City: Baker
- Owner: Montana-Dakota Utilities Company