Danielson Community wind project was set up in Minnesota, USA It was brought online in 2011 and is owned by Danielson Wind Farms.
It is near Meeker County.
See below for data.
As a rule, economic wind turbines require a wind speed of 4.5 m/s (16 km/h) or greater.
A great place for a project like Danielson Community could have a near constant flow of non-turbulent wind throughout the year, having a minimum probability of abrupt effective bursts of wind. An essential aspect of turbine siting is furthermore admittance to local demand or transmission capaMeeker County.
Before construction, Danielson Community was almost certainly screened on the basis of a wind atlas, and validated with wind measurements. Meteorological wind data alone is usually not adequate for precise siting of a large wind power project.
Site information around Meeker County would have been a major aspect in the development final decision Winds around Meeker County are analysed for at least a year or so plus the introduction of detailed maps. Only then are wind turbines installed.
The wind blows quicker at higher altitudes as a result of reduced influence of drag. The surge in velocity with altitude is most spectacular near the surface and is impacted by geography, surface roughness, and upwind limitations such as trees or buildings. Velocity grows with altitude and it is more pronounced near land and is altered by topography, surface and obstructions.
Wind speeds growing with altitude is part of a wind energy law. This Minnesotas wind speed rises with the 7th root of altitude. Increasing the height of a turbine, then, raises the anticipated wind speeds by 10%, and the predicted power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they’re spaced out in order that they don’t affect each other. But micrositing increases placement, specifically in hilly areas.
Individual turbines at Danielson Community are interlocked with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, that medium-voltage electric current is increased in voltage with a transformer for link with the high voltage transmission system. Development of a land-based wind farm requires installation of the collector system and substation, and possibly access roads to each turbine site.
Facts about Danielson Community wind farm
- Name: Danielson Community
- Wind turbine Supplier: Senvion, Model: MD77/1500, Units: 1,
- Country: USA
- Developer: Juhl Energy
- State: Minnesota
- City: Meeker County
- Owner: Danielson Wind Farms