Cumberland Rose wind farm is located in Iowa, USA. It was finished in 2012 and is owned by Cumberland Rose Wind Energy, LLC.
It is near North of Orient.
See below for data.
Wind farms, as a general rule need wind speeds of 4.5 metres per second or more.
An ideal place for a project like Cumberland Rose would have a near constant flow of non-turbulent wind year round, with a minimum chance of abrupt powerful bursts of wind. Additionally, you wouldn’t get a turbine Cumberland Rose Wind Energy, LLC like Cumberland Rose Wind Energy, LLC associated if Cumberland Rose was not built near local demand or transmission capaNorth of Orient.
During the planning stages the Cumberland Rose wind farm would have been checked and endorsed through wind measurements. However, Cumberland Rose wind farm might have needed more than merely meteorological data and measurements.
Assortment of site-specific data for wind speed and direction would have been imperative to determining site potential as a way to fund the project. Local winds are frequently monitored for a year or more, and comprehensive wind maps created before wind generators are installed.
Altitude would also have a part to playwithin a project like Cumberland Rose. This is because of drag The increase in velocity with altitude is most extraordinary near the surface and is impacted by topography, surface roughness, and upwind limitations such as trees or buildings. Velocity rises with altitude and it is more obvious near land and is transformed by geography, surface and hurdles.
Normally, the increase of wind speeds with increasing height follows a wind profile power law, which predicts that wind speed rises proportionately to the seventh root of altitude. Increasing the altitude of a turbine, then, boosts the expected wind speeds by 10%, and the expected power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they are spaced out so that they don’t affect each other. But this might not be the way it is in hilly areas.
Individual turbines at Cumberland Rose are connected with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, this medium-voltage electric current is elevated in voltage using a transformer for connection to the high voltage transmission system. Development of a land-based wind farm requires installation of the collector system and substation, and probably access roads to each and every turbine site.
Facts about Cumberland Rose wind farm
- Name: Cumberland Rose
- Wind turbine Supplier: Vestas Wind Systems, Model: V80/2000, Units: 3,
- Country: USA
- State: Iowa
- City: North of Orient
- Owner: Cumberland Rose Wind Energy, LLC