Crystal Lake Clipper wind project was installed in Iowa, USA It was created in 2009 and is owned by NextEra Energy.
It is near Crystal Lake.
See below for data.
Wind farms, as a general rule need wind speeds of 4.5 metres per second or higher.
The best destination for something such as Crystal Lake Clipper would be a steady availability of non-turbulent wind. An important factor of turbine siting is furthermore access to local demand or transmission capaCrystal Lake.
Before building, Crystal Lake Clipper was most likely screened on the foundation of a wind atlas, and validated with wind specifications. However, Crystal Lake Clipper wind farm might have needed more than merely meteorological data and measurements.
Assortment of site-specific data for wind speed and direction could have been imperative to determining site potential as a way to finance the project. Winds around Crystal Lake are evaluated for at least a year or so plus the creation of detailed maps. Only then are wind turbines installed.
Altitude would also have a part to performin a project like Crystal Lake Clipper. This is because of drag The surge in velocity with altitude is most remarkable near the surface and is affected by landscape, surface roughness, and upwind obstructions such as trees or buildings. Velocity increases with altitude and it is more pronounced near land and is altered by landscape, surface and hurdles.
Ordinarily, the increase of wind speeds with escalating elevation follows a wind profile power law, which predicts that wind speed rises proportionately to the seventh root of altitude. Increasing the elevation of a turbine, then, boosts the anticipated wind speeds by 10%, and the expected power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they are spaced out so they really don’t affect one another. But micrositing increases placement, particularly in hilly areas.
Crystal Lake Clipper turbines are linked via medium voltage lines and communications.
At a substation, this kind of medium-voltage electric current is elevated in voltage with a transformer for connection to the high voltage transmission system. Construction of a land-based wind farm requires installing of the collector system and substation, and probably access roads to every turbine site.
Facts about Crystal Lake Clipper wind farm
- Name: Crystal Lake Clipper
- Wind turbine Supplier: Vestas Wind Systems, Model: V80/2000, Units: 8,
- Country: USA
- Developer: NextEra Energy
- State: Iowa
- City: Crystal Lake
- Owner: NextEra Energy