Cow Branch wind project was set up in Missouri, USA It was created in 2008 and is owned by Wind Capital Group, John Deere Wind Energy.
It is near Atchison County.
See below for data.
Wind farms, as a general rule need wind speeds of 4.5 metres per second or higher.
The best location for something like Cow Branch would be a steady availability of non-turbulent wind. An important factor of turbine siting is furthermore admission to local demand or transmission capaAtchison County.
Before construction, Cow Branch was probably screened on the foundation of a wind atlas, and validated with wind specifications. However, Cow Branch wind farm might have needed more than simply meteorological data and measurements.
Site info around Atchison County would have been a major factor in the ‘development’ choice Local winds are often monitored for a year or more, and detailed wind maps constructed before wind generators are set up.
Altitude would also possess a part to performin a project like Cow Branch. This is due to drag The rise in velocity with altitude is most extraordinary at the surface and is impacted by topography, surface roughness, and upwind obstructions such as trees or buildings. Velocity grows with altitude and is more obvious near land and is altered by landscape, surface and obstructions.
Usually, the increase of wind speeds with increasing height follows a wind profile power law, which anticipates that wind speed rises proportionately to the seventh root of altitude. Increasing the elevation of a turbine, then, enhances the anticipated wind speeds by 10%, and the predicted power by 34%.
In general, a range of 7D (7 × Rotor Diameter of the Wind Turbine) is set between each turbine in a fully developed wind farm. But micrositing increases placement, specially in hilly areas.
Individual turbines at Cow Branch are interlocked with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, this particular medium-voltage electric current is enhanced in voltage with a transformer for connection to the high voltage transmission system. Construction of a land-based wind farm requires setting up the collector system and substation, and probably roads to each turbine site.
Facts about Cow Branch wind farm
- Name: Cow Branch
- Wind turbine Supplier: Enercon, Model: E70/2300, Units: 3,
- Country: USA
- Developer: Wind Capital Group, John Deere Wind Energy
- State: Missouri
- City: Atchison County
- Owner: Wind Capital Group, John Deere Wind Energy