Cooper Farms wind project was installed in Ohio, USA It was brought online in 2012 and is owned by V.H. Cooper and Company Inc..
It is near Van Wert County.
See below for data.
Wind farms, as a general rule demand wind speeds of 4.5 metres per second or more.
The best destination for a project like Cooper Farms might have a near constant flow of non-turbulent wind throughout the year, having a minimum probability of abrupt effective bursts of wind. An important factor of turbine siting is furthermore access to local requirement or transmission capaVan Wert County.
Before development, Cooper Farms was most likely screened on the basis of a wind atlas, and validated with wind specifications. However, Cooper Farms wind farm might have needed more than merely meteorological data and measurements.
Site data around Van Wert County is a major element in the development final decision Local winds are frequently examined for a year or more, and detailed wind maps built before wind generators are installed.
The wind blows sooner at greater altitudes as a result of reduced effect of drag. The increase in velocity with altitude is most extraordinary close to the surface and is impacted by geography, surface roughness, and upwind obstructions such as trees or buildings. Velocity boosts with altitude and it is more distinct near land and is changed by geography, surface and obstacles.
Typically, the rise of wind speeds with increasing elevation follows a wind profile power law, which anticipates that wind speed rises proportionately to the seventh root of altitude. Increasing the elevation of a turbine, then, increases the predicted wind speeds by 10%, and the anticipated power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they are spaced out so they really don’t affect each other. But micrositing optimizes placement, specifically in hilly areas.
Cooper Farms turbines are linked via medium voltage lines and communications.
At a substation, this particular medium-voltage electric energy is improved in voltage with a transformer for connection to the high voltage transmission system. Development of a land-based wind farm requires setting up the collector system and substation, and perhaps access roads to each and every turbine site.
Facts about Cooper Farms wind farm
- Name: Cooper Farms
- Wind turbine Supplier: Siemens, Model: SWT2.3-82VS, Units: 18,
- Country: USA
- Developer: One Energy, LLC
- State: Ohio
- City: Van Wert County
- Owner: V.H. Cooper and Company Inc.