Centennial I wind farm is located in Oklahoma, USA. It was completed in 2006 and is owned by Oklahoma Gas and Electric Company (OG&E).
It is near Harper County.
See below for data.
Wind farms, as a general rule call for wind speeds of 4.5 metres per second or more.
The very best location for something similar to Centennial I would be a steady availability of non-turbulent wind. An essential aspect of turbine siting is furthermore admission to local requirement or transmission capaHarper County.
During the planning stages the Centennial I wind farm would’ve been checked and endorsed through wind measurements. However, Centennial I wind farm would have needed more than simply meteorological data and measurements.
Collection of site-specific data for wind speed and direction could have been imperative to determining site potential as a way to fund the project. Winds around Harper County are examined for at least a year or so alongside the development of detailed maps. Only then are wind turbines installed.
The wind blows quicker at greater altitudes due to the reduced influence of drag. The rise in velocity with altitude is most extraordinary at the surface and is impacted by geography, surface roughness, and upwind hurdles such as trees or buildings. Velocity boosts with altitude and is also more pronounced near land and is altered by terrain, surface and limitations.
Generally, the increase of wind speeds with raising elevation follows a wind profile power law, which anticipates that wind speed rises proportionately to the seventh root of altitude. Increasing the elevation of a turbine, then, increases the expected wind speeds by 10%, and the expected power by 34%.
In general, a distance of 7D (7 × Rotor Diameter of the Wind Turbine) is scheduled between each turbine in a fully developed wind farm. But micrositing optimizes placement, particularly in hilly areas.
Individual turbines at Centennial I are connected with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, this medium-voltage electric current is elevated in voltage with a transformer for connection to the high voltage transmission system. Building of a land-based wind farm requires installation of the collector system and substation, and perhaps roads to each turbine site.
Facts about Centennial I wind farm
- Name: Centennial I
- Wind turbine Supplier: Enercon, Model: E40 -600kW, Units: 7,
- Country: USA
- Developer: Chermac Energy, Invenergy
- State: Oklahoma
- City: Harper County
- Owner: Oklahoma Gas and Electric Company (OG&E)