Cedar Creek I wind project was installed in Colorado, USA It was in fact brought online in 2008 and is owned by BP Alternative Energy.
It is near Weld County.
See below for data.
Wind farms, as a general rule require wind speeds of 4.5 metres per second or higher.
The best location for something such as Cedar Creek I would be a steady supply of non-turbulent wind. An important factor of turbine siting is moreover admission to local demand or transmission capaWeld County.
Before building, Cedar Creek I was probably screened on the basis of a wind atlas, and validated with wind specifications. Meteorological wind data alone is usually not sufficient for precise siting of a large wind power project.
Site info around Weld County is a major element in the development final decision Winds around Weld County are analysed for at least a year or so plus the creation of detailed maps. Only then are wind turbines installed.
The wind blows quicker at greater altitudes because of the reduced effect of drag. The increase in velocity with altitude is most spectacular close to the surface and is affected by topography, surface roughness, and upwind limitations such as trees or buildings. Velocity rises with altitude and it is more distinct near land and is changed by topography, surface and hurdles.
Normally, the growth of wind speeds with increasing height follows a wind profile power law, which forecasts that wind speed rises proportionately to the seventh root of altitude. Increasing the altitude of a turbine, then, enhances the predicted wind speeds by 10%, and the estimated power by 34%.
In general, a range of 7D (7 × Rotor Diameter of the Wind Turbine) is defined between each turbine in a fully developed wind farm. However this isn’t necessarily the case in hilly areas.
Individual turbines at Cedar Creek I are interconnected with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, this medium-voltage electric current is increased in voltage with a transformer for connection to the high voltage transmission system. Development of a land-based wind farm requires installing of the collector system and substation, and possibly roads to each turbine site.
Facts about Cedar Creek I wind farm
- Name: Cedar Creek I
- Wind turbine Supplier: Made Tecnolgías, Model: AE46, Units: 37,
- Country: USA
- Developer: BP Alternative Energy, Infigen, Babcock & Brown
- State: Colorado
- City: Weld County
- Owner: BP Alternative Energy