Cayuga Ridge wind project was set up in Illinois, USA It was brought online in 2010 and is owned by .
It is near .
See below for data.
As a rule, economic wind turbines require a wind speed of 4.5 m/s (16 km/h) or larger.
The very best location for something similar to Cayuga Ridge would be a steady supply of non-turbulent wind. An essential aspect of turbine siting is moreover admission to local demand or transmission capa.
During the planning stages the Cayuga Ridge wind farm would’ve been checked and validated through wind measurements. Meteorological wind data alone is usually not adequate for precise siting of a large wind power project.
Site information around would have been a major element in the development decision Winds around are analysed for at least a year or so alongside the introduction of detailed maps. Only then are wind turbines installed.
Altitude would also possess a part to playin a project like Cayuga Ridge. This is because of drag The rise in velocity with altitude is most remarkable near the surface and is impacted by topography, surface roughness, and upwind hurdles such as trees or buildings. Velocity rises with altitude and is also more pronounced near land and is altered by geography, surface and obstructions.
Usually, the increase of wind speeds with increasing height follows a wind profile power law, which forecasts that wind speed rises proportionately to the seventh root of altitude. Increasing the altitude of a turbine, then, raises the expected wind speeds by 10%, and the estimated power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they are spaced out so that they don’t affect one another. But this is not always the situation in hilly areas.
Individual turbines at Cayuga Ridge are connected with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, it medium-voltage electric energy is increased in voltage using a transformer for connection to the high voltage transmission system. Construction of a land-based wind farm requires setting up the collector system and substation, and probably access roads to each and every turbine site.
Facts about Cayuga Ridge wind farm
- Name: Cayuga Ridge
- Wind turbine Supplier: Bonus, Model: B82/2300, Units: 21,
- Country: USA
- Developer: Iberdrola
- State: Illinois