Camp William Utah National Guard I wind farm is located in Utah, USA. It was completed in 2000 and is owned by Camp William Utah National Guard.
It is near Riverton.
See below for data.
For the most part, economic wind power generators require a wind speed of 4.5 m/s (16 km/h) or bigger.
A great location for a project like Camp William Utah National Guard I would have a near constant flow of non-turbulent wind throughout the year, having a minimum chances of abrupt powerful bursts of wind. Additionally, you wouldn’t get a turbine Camp William Utah National Guard like Camp William Utah National Guard associated if Camp William Utah National Guard I was not built near local demand or transmission capaRiverton.
Before construction, Camp William Utah National Guard I was almost certainly screened on the foundation of a wind atlas, and validated with wind measurements. However, Camp William Utah National Guard I wind farm might have needed more than merely meteorological data and measurements.
Site information around Riverton is a major factor in the ‘development’ conclusion Local winds are frequently watched for a year or more, and comprehensive wind maps made before wind generators are set up.
The wind blows swifter at greater altitudes as a result of reduced effect of drag. The increase in velocity with altitude is most dramatic close to the surface and is impacted by geography, surface roughness, and upwind obstructions such as trees or buildings. Velocity grows with altitude and is more obvious near land and is transformed by terrain, surface and limitations.
Almost always, the rise of wind speeds with growing elevation follows a wind profile power law, which anticipates that wind speed rises proportionately to the seventh root of altitude. Increasing the height of a turbine, then, increases the predicted wind speeds by 10%, and the anticipated power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they are spaced out so they really don’t affect one another. However this is not always the case in hilly areas.
Camp William Utah National Guard I turbines are connected via medium voltage lines and communications.
At a substation, that medium-voltage electric current is improved in voltage with a transformer for link with the high voltage transmission system. Construction of a land-based wind farm requires installation of the collector system and substation, and probably access roads to each and every turbine site.
Facts about Camp William Utah National Guard I wind farm
- Name: Camp William Utah National Guard I
- Wind turbine Supplier: General Electric, Model: GE1.5sle, Units: 100,
- Country: USA
- State: Utah
- City: Riverton
- Owner: Camp William Utah National Guard