California Ridge wind farm is located in Illinois, USA. It was brought online in 2012 and is owned by Invenergy, TerraForm Power Inc..
It is near Champaign and Vermillion Counties.
See below for data.
Wind farms, as a general rule call for wind speeds of 4.5 metres per second or higher.
The best location for something like California Ridge would be a steady availability of non-turbulent wind. Additionally, you wouldn’t get a turbine Invenergy, TerraForm Power Inc. like Invenergy, TerraForm Power Inc. included if California Ridge was not built near local demand or transmission capaChampaign and Vermillion Counties.
Before development, California Ridge was most likely screened on the foundation of a wind atlas, and validated with wind measurements. Meteorological wind data alone is usually not adequate for precise siting of a large wind power project.
Collection of site-specific data for wind speed and direction might have been essential to determining site potential as a way to finance the project. Local winds are often checked for a year or more, and comprehensive wind maps created before wind generators are set up.
Altitude would also possess a part to playwithin a project like California Ridge. This is because of drag The rise in velocity with altitude is most spectacular at the surface and is impacted by landscape, surface roughness, and upwind obstacles such as trees or buildings. Velocity grows with altitude and is more distinct near land and is changed by landscape, surface and obstructions.
Commonly, the rise of wind speeds with raising elevation follows a wind profile power law, which forecasts that wind speed rises proportionately to the seventh root of altitude. Increasing the height of a turbine, then, increases the predicted wind speeds by 10%, and the expected power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they’re spaced out so they really don’t affect one another. But this isn’t necessarily the situation in hilly areas.
Individual turbines at California Ridge are connected with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, that medium-voltage electric current is increased in voltage with a transformer for link with the high voltage transmission system. Building of a land-based wind farm requires installation of the collector system and substation, and perhaps access roads to each and every turbine site.
Facts about California Ridge wind farm
- Name: California Ridge
- Wind turbine Supplier: Vestas Wind Systems, Model: V112-3.0, Units: 5,
- Country: USA
- Developer: Invenergy
- State: Illinois
- City: Champaign and Vermillion Counties
- Owner: Invenergy, TerraForm Power Inc.