Buffalo Mountain Wind Energy Center I wind farm is located in Tennessee, USA. It was in fact brought online in 2000 and is owned by Tennessee Valley Authority.
It is near Anderson County.
See below for data.
Typically, economic wind generators require a wind speed of 4.5 m/s (16 km/h) or larger.
The very best location for something such as Buffalo Mountain Wind Energy Center I would be a steady supply of non-turbulent wind. An essential aspect of turbine siting is furthermore admission to local requirement or transmission capaAnderson County.
During the planning stages the Buffalo Mountain Wind Energy Center I wind farm would’ve been checked and validated through wind measurements. However, Buffalo Mountain Wind Energy Center I wind farm would have needed more than simply meteorological data and measurements.
Collection of site-specific data for wind speed and direction might have been important to determining site potential as a way to finance the project. Local winds are frequently watched for a year or more, and detailed wind maps created before wind generators are installed.
The wind blows swifter at higher altitudes because of the reduced influence of drag. The increase in velocity with altitude is most remarkable at the surface and is affected by landscape, surface roughness, and upwind limitations such as trees or buildings. Velocity rises with altitude and is also more obvious near land and is changed by terrain, surface and hurdles.
Generally, the growth of wind speeds with growing height follows a wind profile power law, which predicts that wind speed rises proportionately to the seventh root of altitude. Doubling the height of a turbine, then, boosts the expected wind speeds by 10%, and the estimated power by 34%.
In general, a distance of 7D (7 × Rotor Diameter of the Wind Turbine) is set between each turbine in a fully developed wind farm. But this is not always the way it is in hilly areas.
Buffalo Mountain Wind Energy Center I turbines are linked via medium voltage lines and communications.
At a substation, this kind of medium-voltage electric current is elevated in voltage with a transformer for connection to the high voltage transmission system. Building of a land-based wind farm requires installation of the collector system and substation, and probably roads to each and every turbine site.
Facts about Buffalo Mountain Wind Energy Center I wind farm
- Name: Buffalo Mountain Wind Energy Center I
- Wind turbine Supplier: General Electric, Model: GE1.5sle, Units: 155,
- Country: USA
- Developer: enXco
- State: Tennessee
- City: Anderson County
- Owner: Tennessee Valley Authority