Buffalo Gap wind project was installed in Texas, USA It was in fact brought online in 2005 and is owned by AES Corporation.
It is near .
See below for data.
For the most part, economic wind power generators require a wind speed of 4.5 m/s (16 km/h) or higher.
A great location for a project like Buffalo Gap might have a near constant flow of non-turbulent wind all year long, having a minimum likelihood of sudden effective bursts of wind. An essential aspect of turbine siting is moreover admission to local requirement or transmission capa.
Before building, Buffalo Gap was almost certainly screened on the basis of a wind atlas, and validated with wind specifications. However, Buffalo Gap wind farm would have needed more than merely meteorological data and measurements.
Site data around would have been a major aspect in the development conclusion Local winds are often monitored for a year or more, and comprehensive wind maps built before wind generators are set up.
The wind hits sooner at greater altitudes as a result of reduced effect of drag. The rise in velocity with altitude is most extraordinary at the surface and is impacted by geography, surface roughness, and upwind obstacles such as trees or buildings. Velocity increases with altitude and is more distinct near land and is changed by terrain, surface and hurdles.
Wind speeds increasing with altitude is part of a wind energy law. This anticipates wind speed rises with the 7th root of altitude. Increasing the height of a turbine, then, increases the predicted wind speeds by 10%, and the expected power by 34%.
In general, a range of 7D (7 × Rotor Diameter of the Wind Turbine) is about between each turbine in a fully developed wind farm. But micrositing maximizes placement, specially in hilly areas.
Buffalo Gap turbines are connected via medium voltage lines and communications.
At a substation, this medium-voltage electric energy is improved in voltage using a transformer for connection to the high voltage transmission system. Building of a land-based wind farm requires installing of the collector system and substation, and possibly roads to each turbine site.
Facts about Buffalo Gap wind farm
- Name: Buffalo Gap
- Wind turbine Supplier: Suzlon Energy, Model: S88/2100, Units: 9,
- Country: USA
- Developer: AES Corporation
- State: Texas
- Owner: AES Corporation