Bobcat Bluff wind farm is situated in Texas, USA. It was finished in 2012 and is owned by EDF Renewable Energy.
It is near 20 miles south of Wichita Falls in Archer County.
See below for data.
Typically, economic wind turbines require a wind speed of 4.5 m/s (16 km/h) or larger.
The best location for something like Bobcat Bluff would be a steady availability of non-turbulent wind. An important factor of turbine siting is also access to local requirement or transmission capa20 miles south of Wichita Falls in Archer County.
During the planning stages the Bobcat Bluff wind farm would’ve been checked and endorsed through wind measurements. Meteorological wind data alone is usually not ample for accurate siting of a large wind power project.
Assortment of site-specific data for wind speed and direction would have been crucial to determining site potential in order to fund the project. Local winds are often monitored for a year or more, and comprehensive wind maps constructed before wind generators are set up.
The wind blows more quickly at greater altitudes as a result of reduced effect of drag. The increase in velocity with altitude is most dramatic near the surface and is affected by topography, surface roughness, and upwind obstacles such as trees or buildings. Velocity boosts with altitude and is more obvious near land and is transformed by topography, surface and limitations.
Wind speeds growing with altitude is part of a wind energy law. This Texass wind speed rises with the 7th root of altitude. Increasing the elevation of a turbine, then, boosts the predicted wind speeds by 10%, and the predicted power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they are spaced out so they really don’t affect each other. But micrositing maximizes placement, particularly in hilly areas.
Individual turbines at Bobcat Bluff are connected with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, this medium-voltage electric energy is elevated in voltage with a transformer for link with the high voltage transmission system. Development of a land-based wind farm requires installing of the collector system and substation, and probably access roads to every turbine site.
Facts about Bobcat Bluff wind farm
- Name: Bobcat Bluff
- Wind turbine Supplier: Vestas Wind Systems, Model: 2MW, Units: 7,
- Country: USA
- Developer: EDF Renewable Energy
- State: Texas
- City: 20 miles south of Wichita Falls in Archer County
- Owner: EDF Renewable Energy