Biglow Canyon phase 2 wind farm is situated in Oregon, USA. It was brought online in 2009 and is owned by Portland General Electric (PGE).
It is near Sherman County.
See below for data.
Wind farms, as a general rule require wind speeds of 4.5 metres per second or more.
An ideal location for a project like Biglow Canyon phase 2 might have a near constant flow of non-turbulent wind throughout the year, having a minimum chances of sudden powerful bursts of wind. Additionally, you would not get a turbine Portland General Electric (PGE) like Portland General Electric (PGE) associated if Biglow Canyon phase 2 was not built near local demand or transmission capaSherman County.
During the planning stages the Biglow Canyon phase 2 wind farm would have been checked and endorsed through wind measurements. However, Biglow Canyon phase 2 wind farm might have needed more than simply meteorological data and measurements.
Site info around Sherman County is a major factor in the development choice Local winds are often examined for a year or more, and comprehensive wind maps made before wind generators are installed.
Altitude would also have a part to performwithin a project like Biglow Canyon phase 2. This is due to drag The boost in velocity with altitude is most extraordinary near the surface and is affected by geography, surface roughness, and upwind limitations such as trees or buildings. Velocity grows with altitude and is more obvious near land and is altered by topography, surface and obstructions.
Almost always, the increase of wind speeds with increasing elevation follows a wind profile power law, which anticipates that wind speed rises proportionately to the seventh root of altitude. Increasing the height of a turbine, then, enhances the anticipated wind speeds by 10%, and the predicted power by 34%.
In general, a length of 7D (7 × Rotor Diameter of the Wind Turbine) is scheduled between each turbine in a fully developed wind farm. But this might not be the situation in hilly areas.
Individual turbines at Biglow Canyon phase 2 are interconnected with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, that medium-voltage electric current is elevated in voltage with a transformer for connection to the high voltage transmission system. Construction of a land-based wind farm requires setting up the collector system and substation, and probably access roads to each turbine site.
Facts about Biglow Canyon phase 2 wind farm
- Name: Biglow Canyon phase 2
- Wind turbine Supplier: Vestas Wind Systems, Model: V80/2MW, Units: 10,
- Country: USA
- Developer: Orion Energy, Portland General Electric (PGE)
- State: Oregon
- City: Sherman County
- Owner: Portland General Electric (PGE)