Big Spring I wind farm is situated in Texas, USA. It was completed in 1999 and is owned by Caithness Energy.
It is near Howard County.
See below for data.
Wind farms, as a general rule demand wind speeds of 4.5 metres per second or more.
An ideal position for a project like Big Spring I would have a near constant flow of non-turbulent wind all year long, with a minimum chances of abrupt potent bursts of wind. An important factor of turbine siting is furthermore access to local requirement or transmission capaHoward County.
During the planning stages the Big Spring I wind farm would’ve been checked and validated through wind measurements. Meteorological wind data alone is usually not ample for correct siting of a large wind power project.
Collection of site-specific data for wind speed and direction would have been crucial to determining site potential to be able to finance the project. Winds around Howard County are examined for at least a year or so alongside the creation of detailed maps. Only then are wind turbines installed.
Altitude would also possess a part to playin a project like Big Spring I. This is due to drag The boost in velocity with altitude is most remarkable near the surface and is affected by landscape, surface roughness, and upwind obstructions such as trees or buildings. Velocity increases with altitude and it is more distinct near land and is changed by terrain, surface and obstacles.
Sometimes, the increase of wind speeds with raising elevation follows a wind profile power law, which anticipates that wind speed rises proportionately to the seventh root of altitude. Doubling the elevation of a turbine, then, raises the anticipated wind speeds by 10%, and the expected power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they’re spaced out in order that they don’t affect each other. However this may not be the situation in hilly areas.
Big Spring I turbines are linked via medium voltage lines and communications.
At a substation, this particular medium-voltage electric energy is increased in voltage using a transformer for link with the high voltage transmission system. Building of a land-based wind farm requires installation of the collector system and substation, and possibly access roads to every turbine site.
Facts about Big Spring I wind farm
- Name: Big Spring I
- Wind turbine Supplier: Suzlon Energy, Model: S88/2.1MW, Units: 114,
- Country: USA
- Developer: York Research
- State: Texas
- City: Howard County
- Owner: Caithness Energy