Bergey Windpower Headquarters wind farm is situated in Oklahoma, USA. It was brought online in 2005 and is owned by Bergey Windpower.
It is near Norman.
See below for data.
In most cases, economic wind machines require a wind speed of 4.5 m/s (16 km/h) or higher.
The very best location for something such as Bergey Windpower Headquarters would be a steady availability of non-turbulent wind. An important factor of turbine siting is also access to local demand or transmission capaNorman.
During the planning stages the Bergey Windpower Headquarters wind farm would’ve been checked and validated through wind measurements. Meteorological wind data alone is usually not adequate for accurate siting of a large wind power project.
Assortment of site-specific data for wind speed and direction might have been essential to determining site potential to be able to finance the project. Local winds are often supervised for a year or more, and detailed wind maps built before wind generators are installed.
Altitude would also possess a part to performin a project like Bergey Windpower Headquarters. This is because of drag The increase in velocity with altitude is most dramatic close to the surface and is affected by geography, surface roughness, and upwind limitations such as trees or buildings. Velocity grows with altitude and is more obvious near land and is changed by topography, surface and limitations.
Wind speeds escalating with altitude is part of a wind energy law. This forecasts wind speed rises with the 7th root of altitude. Doubling the elevation of a turbine, then, raises the expected wind speeds by 10%, and the expected power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they’re spaced out to make sure they don’t affect each other. However this is not always the situation in hilly areas.
Individual turbines at Bergey Windpower Headquarters are interlocked with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, this medium-voltage electric current is enhanced in voltage with a transformer for connection to the high voltage transmission system. Development of a land-based wind farm requires installation of the collector system and substation, and probably access roads to each and every turbine site.
Facts about Bergey Windpower Headquarters wind farm
- Name: Bergey Windpower Headquarters
- Wind turbine Supplier: Enercon, Model: E70/2000 , Units: 19,
- Country: USA
- Developer: Bergey Windpower
- State: Oklahoma
- City: Norman
- Owner: Bergey Windpower