Beech Ridge wind project was installed in West Virginia, USA It was finished in 2010 and is owned by Beech Ridge Energy, Invenergy.
It is near Greenbrier and Nicholas counties.
See below for data.
Wind farms, as a general rule demand wind speeds of 4.5 metres per second or more.
The very best destination for something similar to Beech Ridge is a steady supply of non-turbulent wind. Additionally, you wouldn’t get a turbine Beech Ridge Energy, Invenergy like Beech Ridge Energy, Invenergy associated if Beech Ridge was not built near local demand or transmission capaGreenbrier and Nicholas counties.
During the planning stages the Beech Ridge wind farm would’ve been checked and confirmed through wind measurements. Meteorological wind data alone is usually not adequate for correct siting of a large wind power project.
Collection of site-specific data for wind speed and direction could have been important to determining site potential in order to fund the project. Local winds are frequently monitored for a year or more, and comprehensive wind maps constructed before wind generators are set up.
Altitude would also possess a part to performin a project like Beech Ridge. This is because of drag The rise in velocity with altitude is most spectacular at the surface and is impacted by geography, surface roughness, and upwind obstructions such as trees or buildings. Velocity rises with altitude and it is more evident near land and is transformed by geography, surface and limitations.
Sometimes, the growth of wind speeds with growing elevation follows a wind profile power law, which forecasts that wind speed rises proportionately to the seventh root of altitude. Increasing the elevation of a turbine, then, enhances the predicted wind speeds by 10%, and the estimated power by 34%.
In general, a range of 7D (7 × Rotor Diameter of the Wind Turbine) is defined between each turbine in a fully developed wind farm. But micrositing increases placement, specifically in hilly areas.
Beech Ridge turbines are related via medium voltage lines and communications.
At a substation, this medium-voltage electric current is increased in voltage using a transformer for link with the high voltage transmission system. Construction of a land-based wind farm requires setting up the collector system and substation, and possibly roads to each and every turbine site.
Facts about Beech Ridge wind farm
- Name: Beech Ridge
- Wind turbine Supplier: Nordex, Model: N117/2400, Units: 34,
- Country: USA
- Developer: Invenergy
- State: West Virginia
- City: Greenbrier and Nicholas counties
- Owner: Beech Ridge Energy, Invenergy