Altamont Winds wind project was installed in California, USA It was created in 1988 and is owned by Altamont Winds Inc, Wind Works Power.
It is near Altamont Pass.
See below for data.
Generally speaking, economic wind power generators require a wind speed of 4.5 m/s (16 km/h) or larger.
The best destination for something like Altamont Winds would be a steady availability of non-turbulent wind. Additionally, you would not get a turbine Altamont Winds Inc, Wind Works Power like Altamont Winds Inc, Wind Works Power included if Altamont Winds was not built near local demand or transmission capaAltamont Pass.
Before development, Altamont Winds was most likely screened on the foundation of a wind atlas, and validated with wind specifications. However, Altamont Winds wind farm might have needed more than simply meteorological data and measurements.
Collection of site-specific data for wind speed and direction would have been crucial to determining site potential as a way to fund the project. Local winds are often watched for a year or more, and comprehensive wind maps constructed before wind generators are set up.
Altitude would also possess a part to playin a project like Altamont Winds. This is because of drag The boost in velocity with altitude is most extraordinary near the surface and is impacted by landscape, surface roughness, and upwind obstructions such as trees or buildings. Velocity boosts with altitude and is also more distinct near land and is changed by landscape, surface and limitations.
Normally, the growth of wind speeds with escalating elevation follows a wind profile power law, which anticipates that wind speed rises proportionately to the seventh root of altitude. Doubling the height of a turbine, then, raises the expected wind speeds by 10%, and the expected power by 34%.
In general, a range of 7D (7 × Rotor Diameter of the Wind Turbine) is set between each turbine in a fully developed wind farm. However this is not always the case in hilly areas.
Individual turbines at Altamont Winds are connected with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, that medium-voltage electric current is improved in voltage with a transformer for connection to the high voltage transmission system. Construction of a land-based wind farm requires installing of the collector system and substation, and possibly access roads to each turbine site.
Facts about Altamont Winds wind farm
- Name: Altamont Winds
- Wind turbine Supplier: Kenetech Windpower, Model: USW56, Units: 828,
- Country: USA
- Developer: Kenetech Windpower
- State: California
- City: Altamont Pass
- Owner: Altamont Winds Inc, Wind Works Power