Alite wind project was set up in California, USA It was finished in 2008 and is owned by .
It is near .
See below for data.
Wind farms, as a general rule need wind speeds of 4.5 metres per second or more.
An ideal place for a project like Alite would have a near constant flow of non-turbulent wind all year round, with a minimum chances of abrupt potent bursts of wind. Additionally, you wouldn’t get a turbine like associated if Alite was not built near local demand or transmission capa.
Before development, Alite was almost certainly screened on the basis of a wind atlas, and validated with wind measurements. Meteorological wind data alone is usually not ample for precise siting of a large wind power project.
Assortment of site-specific data for wind speed and direction might have been vital to determining site potential in order to fund the project. Local winds are often checked for a year or more, and comprehensive wind maps constructed before wind generators are installed.
Altitude would also have a part to playwithin a project like Alite. This is due to drag The rise in velocity with altitude is most extraordinary close to the surface and is affected by landscape, surface roughness, and upwind hurdles such as trees or buildings. Velocity boosts with altitude and it is more evident near land and is changed by landscape, surface and limitations.
Generally, the rise of wind speeds with increasing height follows a wind profile power law, which forecasts that wind speed rises proportionately to the seventh root of altitude. Doubling the altitude of a turbine, then, enhances the expected wind speeds by 10%, and the predicted power by 34%.
In general, a distance of 7D (7 × Rotor Diameter of the Wind Turbine) is set between each turbine in a fully developed wind farm. However this may not be the situation in hilly areas.
Alite turbines are connected via medium voltage lines and communications.
At a substation, this particular medium-voltage electric energy is increased in voltage using a transformer for connection to the high voltage transmission system. Construction of a land-based wind farm requires installing of the collector system and substation, and possibly roads to each turbine site.
Facts about Alite wind farm
- Name: Alite
- Wind turbine Supplier: Vestas Wind Systems, Model: V90/3000, Units: 8,
- Country: USA
- Developer: Allco, Oak Creek Energy Systems
- State: California