Ainsworth Wind Energy Facility wind project was installed in Nebraska, USA It was brought online in 2005 and is owned by Nebraska Public Power District (NPPD).
It is near Ainsworth.
See below for data.
Wind farms, as a general rule require wind speeds of 4.5 metres per second or higher.
The very best location for something similar to Ainsworth Wind Energy Facility would be a steady availability of non-turbulent wind. Additionally, you wouldn’t get a turbine Nebraska Public Power District (NPPD) like Nebraska Public Power District (NPPD) involved if Ainsworth Wind Energy Facility was not built near local demand or transmission capaAinsworth.
During the planning stages the Ainsworth Wind Energy Facility wind farm would have been checked and validated through wind measurements. Meteorological wind data alone is usually not ample for accurate siting of a large wind power project.
Site information around Ainsworth would have been a major aspect in the ‘development’ final decision Local winds are often monitored for a year or more, and detailed wind maps made before wind generators are installed.
Altitude would also have a part to performin a project like Ainsworth Wind Energy Facility. This is due to drag The boost in velocity with altitude is most extraordinary close to the surface and is affected by landscape, surface roughness, and upwind limitations such as trees or buildings. Velocity increases with altitude and it is more evident near land and is altered by terrain, surface and obstructions.
Normally, the rise of wind speeds with increasing elevation follows a wind profile power law, which forecasts that wind speed rises proportionately to the seventh root of altitude. Increasing the elevation of a turbine, then, increases the anticipated wind speeds by 10%, and the estimated power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they are spaced out in order that they don’t affect one another. But this is not always the situation in hilly areas.
Ainsworth Wind Energy Facility turbines are connected via medium voltage lines and communications.
At a substation, this medium-voltage electric energy is enhanced in voltage using a transformer for connection to the high voltage transmission system. Construction of a land-based wind farm requires installing of the collector system and substation, and probably roads to each and every turbine site.
Facts about Ainsworth Wind Energy Facility wind farm
- Name: Ainsworth Wind Energy Facility
- Wind turbine Supplier: Vestas Wind Systems, Model: V82 1.65MW, Units: 36,
- Country: USA
- Developer: Nebraska Public Power District (NPPD)
- State: Nebraska
- City: Ainsworth
- Owner: Nebraska Public Power District (NPPD)