Aeroman repower wind farm is situated in California, USA. It was completed in 2003 and is owned by Coram Energy Group.
It is near Tehachapi.
See below for data.
Wind farms, as a general rule need wind speeds of 4.5 metres per second or more.
A great location for a project like Aeroman repower might have a near constant flow of non-turbulent wind all year long, with a minimum likelihood of abrupt powerful bursts of wind. Additionally, you would not get a turbine Coram Energy Group like Coram Energy Group associated if Aeroman repower was not built near local demand or transmission capaTehachapi.
During the planning stages the Aeroman repower wind farm would’ve been checked and confirmed through wind measurements. However, Aeroman repower wind farm would have needed more than merely meteorological data and measurements.
Collection of site-specific data for wind speed and direction might have been important to determining site potential as a way to finance the project. Local winds are often monitored for a year or more, and comprehensive wind maps created before wind generators are set up.
Altitude would also have a part to performwithin a project like Aeroman repower. This is due to drag The boost in velocity with altitude is most extraordinary near the surface and is affected by landscape, surface roughness, and upwind limitations such as trees or buildings. Velocity boosts with altitude and it is more obvious near land and is changed by geography, surface and obstacles.
Generally, the increase of wind speeds with raising height follows a wind profile power law, which predicts that wind speed rises proportionately to the seventh root of altitude. Increasing the height of a turbine, then, raises the anticipated wind speeds by 10%, and the anticipated power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they’re spaced out so they don’t affect one another. But micrositing increases placement, particularly in hilly areas.
Individual turbines at Aeroman repower are connected with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, it medium-voltage electric energy is enhanced in voltage with a transformer for link with the high voltage transmission system. Construction of a land-based wind farm requires installation of the collector system and substation, and probably roads to each turbine site.
Facts about Aeroman repower wind farm
- Name: Aeroman repower
- Wind turbine Supplier: General Electric, Model: 1.5MW, Units: 2,
- Country: USA
- Developer: Coram Energy Group
- State: California
- City: Tehachapi
- Owner: Coram Energy Group