Adams wind farm is situated in Minnesota, USA. It was in fact brought online in 2011 and is owned by Adams Community Wind.
It is near Meeker County.
See below for data.
Wind farms, as a general rule demand wind speeds of 4.5 metres per second or more.
A great position for a project like Adams would have a near constant flow of non-turbulent wind all year round, with a minimum chances of sudden powerful bursts of wind. Additionally, you wouldn’t get a turbine Adams Community Wind like Adams Community Wind included if Adams was not built near local demand or transmission capaMeeker County.
Before development, Adams was almost certainly screened on the foundation of a wind atlas, and validated with wind measurements. Meteorological wind data alone is usually not sufficient for exact siting of a large wind power project.
Collection of site-specific data for wind speed and direction would have been essential to determining site potential in order to fund the project. Winds around Meeker County are examined for at least a year or so alongside the creation of detailed maps. Only then are wind turbines installed.
Altitude would also have a part to playin a project like Adams. This is because of drag The increase in velocity with altitude is most spectacular close to the surface and is affected by topography, surface roughness, and upwind obstacles such as trees or buildings. Velocity increases with altitude and it is more distinct near land and is altered by topography, surface and hurdles.
Commonly, the increase of wind speeds with escalating height follows a wind profile power law, which forecasts that wind speed rises proportionately to the seventh root of altitude. Increasing the elevation of a turbine, then, enhances the predicted wind speeds by 10%, and the estimated power by 34%.
In general, a range of 7D (7 × Rotor Diameter of the Wind Turbine) is scheduled between each turbine in a fully developed wind farm. But micrositing increases placement, particularly in hilly areas.
Individual turbines at Adams are interlocked with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, it medium-voltage electric current is enhanced in voltage with a transformer for connection to the high voltage transmission system. Development of a land-based wind farm requires installation of the collector system and substation, and possibly access roads to every turbine site.
Facts about Adams wind farm
- Name: Adams
- Wind turbine Supplier: Alstom, Model: ECO 86/ 1.67 MW, Units: 12,
- Country: USA
- Developer: Juhl Energy
- State: Minnesota
- City: Meeker County
- Owner: Adams Community Wind