Luz de Mar (Pintado complex) wind farm is located in Florida, Uruguay. It was brought online in 2014 and is owned by .
It is near Villa de Pintado.
See below for data.
Wind farms, as a general rule need wind speeds of 4.5 metres per second or more.
The very best location for something like Luz de Mar (Pintado complex) would be a steady supply of non-turbulent wind. An important factor of turbine siting is moreover access to local demand or transmission capaVilla de Pintado.
Before development, Luz de Mar (Pintado complex) was most likely screened on the foundation of a wind atlas, and validated with wind specifications. Meteorological wind data alone is usually not enough for correct siting of a large wind power project.
Collection of site-specific data for wind speed and direction could have been vital to determining site potential in order to fund the project. Winds around Villa de Pintado are evaluated for over a year or so plus the development of detailed maps. Only then are wind turbines installed.
Altitude would also have a part to performwithin a project like Luz de Mar (Pintado complex). This is because of drag The rise in velocity with altitude is most extraordinary close to the surface and is affected by topography, surface roughness, and upwind obstructions such as trees or buildings. Velocity boosts with altitude and it is more pronounced near land and is transformed by topography, surface and limitations.
Generally, the growth of wind speeds with escalating elevation follows a wind profile power law, which anticipates that wind speed rises proportionately to the seventh root of altitude. Increasing the elevation of a turbine, then, increases the expected wind speeds by 10%, and the anticipated power by 34%.
In general, a distance of 7D (7 × Rotor Diameter of the Wind Turbine) is about between each turbine in a fully developed wind farm. But this isn’t necessarily the case in hilly areas.
Luz de Mar (Pintado complex) turbines are connected via medium voltage lines and communications.
At a substation, this kind of medium-voltage electric energy is improved in voltage using a transformer for connection to the high voltage transmission system. Building of a land-based wind farm requires setting up the collector system and substation, and possibly roads to each and every turbine site.