Eastman (Voridian) wind project was set up in North West England, UK It was in fact brought online in 2006 and is owned by .
It is near Cumbria.
See below for data.
Wind farms, as a general rule require wind speeds of 4.5 metres per second or higher.
The very best location for something similar to Eastman (Voridian) is a steady availability of non-turbulent wind. An important factor of turbine siting is moreover admission to local requirement or transmission capaCumbria.
Before development, Eastman (Voridian) was almost certainly screened on the foundation of a wind atlas, and validated with wind measurements. Meteorological wind data alone is usually not sufficient for accurate siting of a large wind power project.
Assortment of site-specific data for wind speed and direction could have been vital to determining site potential to be able to finance the project. Local winds are frequently examined for a year or more, and detailed wind maps created before wind generators are installed.
Altitude would also have a part to playin a project like Eastman (Voridian). This is because of drag The rise in velocity with altitude is most spectacular near the surface and is impacted by landscape, surface roughness, and upwind obstructions such as trees or buildings. Velocity grows with altitude and is also more distinct near land and is altered by geography, surface and limitations.
Typically, the growth of wind speeds with raising elevation follows a wind profile power law, which predicts that wind speed rises proportionately to the seventh root of altitude. Increasing the elevation of a turbine, then, enhances the expected wind speeds by 10%, and the estimated power by 34%.
In general, a range of 7D (7 × Rotor Diameter of the Wind Turbine) is set between each turbine in a fully developed wind farm. However this might not be the situation in hilly areas.
Eastman (Voridian) turbines are linked via medium voltage lines and communications.
At a substation, this particular medium-voltage electric current is elevated in voltage with a transformer for link with the high voltage transmission system. Building of a land-based wind farm requires installation of the collector system and substation, and possibly roads to each turbine site.