Earlseat wind project was set up in Southern Scotland, UK It was created in 2014 and is owned by .
It is near located 1.5 km east of Thornton and 3km north of Dysart, Fife.
See below for data.
Wind farms, as a general rule need wind speeds of 4.5 metres per second or higher.
The very best destination for something such as Earlseat is a steady supply of non-turbulent wind. An essential aspect of turbine siting is moreover access to local demand or transmission capalocated 1.5 km east of Thornton and 3km north of Dysart, Fife.
During the planning stages the Earlseat wind farm would’ve been checked and authenticated through wind measurements. Meteorological wind data alone is usually not ample for correct siting of a large wind power project.
Site data around located 1.5 km east of Thornton and 3km north of Dysart, Fife would have been a major element in the ‘development’ final decision Local winds are often watched for a year or more, and comprehensive wind maps created before wind generators are set up.
The wind hits quicker at higher altitudes as a result of reduced influence of drag. The surge in velocity with altitude is most extraordinary close to the surface and is impacted by topography, surface roughness, and upwind limitations such as trees or buildings. Velocity rises with altitude and is also more obvious near land and is altered by landscape, surface and hurdles.
Wind speeds raising with altitude is part of a wind energy law. This predicts wind speed rises with the 7th root of altitude. Increasing the altitude of a turbine, then, enhances the predicted wind speeds by 10%, and the predicted power by 34%.
In general, a range of 7D (7 × Rotor Diameter of the Wind Turbine) is scheduled between each turbine in a fully developed wind farm. However this is not always the situation in hilly areas.
Individual turbines at Earlseat are connected with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, that medium-voltage electric current is improved in voltage with a transformer for link with the high voltage transmission system. Development of a land-based wind farm requires installation of the collector system and substation, and possibly roads to each turbine site.
Facts about Earlseat wind farm
- Name: Earlseat
- Wind turbine Supplier: Vestas Wind Systems, Model: V47/660, Units: 2,
- Country: UK
- Developer: Carbon Free Developments
- State: Southern Scotland
- City: located 1.5 km east of Thornton and 3km north of Dysart, Fife