Earls Hall wind project was set up in Eastern England, UK It was created in 2013 and is owned by Renerco.
It is near Essex.
See below for data.
As a general rule, economic wind power generators require a wind speed of 4.5 m/s (16 km/h) or more.
A perfect position for a project like Earls Hall could have a near constant flow of non-turbulent wind all year long, with a minimum chance of abrupt effective bursts of wind. Additionally, you would not get a turbine Renerco like Renerco associated if Earls Hall was not built near local demand or transmission capaEssex.
During the planning stages the Earls Hall wind farm would have been checked and validated through wind measurements. However, Earls Hall wind farm might have needed more than just meteorological data and measurements.
Assortment of site-specific data for wind speed and direction would have been essential to determining site potential in order to fund the project. Local winds are often monitored for a year or more, and detailed wind maps constructed before wind generators are set up.
Altitude would also possess a part to playin a project like Earls Hall. This is because of drag The rise in velocity with altitude is most remarkable close to the surface and is impacted by landscape, surface roughness, and upwind obstacles such as trees or buildings. Velocity grows with altitude and is also more pronounced near land and is transformed by landscape, surface and obstacles.
Normally, the growth of wind speeds with growing height follows a wind profile power law, which predicts that wind speed rises proportionately to the seventh root of altitude. Doubling the elevation of a turbine, then, boosts the predicted wind speeds by 10%, and the estimated power by 34%.
In general, a length of 7D (7 × Rotor Diameter of the Wind Turbine) is set between each turbine in a fully developed wind farm. But micrositing optimizes placement, particularly in hilly areas.
Individual turbines at Earls Hall are interlocked with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, this kind of medium-voltage electric energy is enhanced in voltage using a transformer for connection to the high voltage transmission system. Construction of a land-based wind farm requires installing of the collector system and substation, and probably access roads to each turbine site.