Dunbeg wind project was installed in Northern Ireland, UK It was finished in 2014 and is owned by .
It is near Limavady, Co Derry.
See below for data.
Wind farms, as a general rule demand wind speeds of 4.5 metres per second or higher.
The best place for a project like Dunbeg could have a near constant flow of non-turbulent wind year round, having a minimum chance of sudden potent bursts of wind. An essential aspect of turbine siting is also access to local demand or transmission capaLimavady, Co Derry.
Before building, Dunbeg was probably screened on the basis of a wind atlas, and validated with wind specifications. However, Dunbeg wind farm would have needed more than simply meteorological data and measurements.
Collection of site-specific data for wind speed and direction could have been imperative to determining site potential in order to fund the project. Winds around Limavady, Co Derry are examined for over a year or so alongside the development of detailed maps. Only then are wind turbines installed.
Altitude would also possess a part to performwithin a project like Dunbeg. This is because of drag The boost in velocity with altitude is most remarkable close to the surface and is impacted by geography, surface roughness, and upwind limitations such as trees or buildings. Velocity increases with altitude and is more obvious near land and is changed by landscape, surface and hurdles.
Ordinarily, the increase of wind speeds with growing elevation follows a wind profile power law, which predicts that wind speed rises proportionately to the seventh root of altitude. Increasing the height of a turbine, then, boosts the predicted wind speeds by 10%, and the anticipated power by 34%.
In general, a distance of 7D (7 × Rotor Diameter of the Wind Turbine) is scheduled between each turbine in a fully developed wind farm. But this isn’t necessarily the case in hilly areas.
Individual turbines at Dunbeg are connected with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, that medium-voltage electric current is improved in voltage using a transformer for link with the high voltage transmission system. Development of a land-based wind farm requires installing of the collector system and substation, and possibly access roads to each turbine site.
Facts about Dunbeg wind farm
- Name: Dunbeg
- Wind turbine Supplier: Enercon, Model: E115 / 3,
- Country: UK
- Developer: Gaelectric
- State: Northern Ireland
- City: Limavady, Co Derry