Dagenham II wind project was set up in Central England, UK It was brought online in 2011 and is owned by Ford Motor Company.
It is near Ford Dagenham Estate,London.
See below for data.
Wind farms, as a general rule need wind speeds of 4.5 metres per second or more.
The best position for a project like Dagenham II might have a near constant flow of non-turbulent wind all year round, with a minimum chances of abrupt potent bursts of wind. An important factor of turbine siting is moreover admission to local demand or transmission capaFord Dagenham Estate,London.
During the planning stages the Dagenham II wind farm would’ve been checked and endorsed through wind measurements. However, Dagenham II wind farm might have needed more than just meteorological data and measurements.
Site info around Ford Dagenham Estate,London would have been a major factor in the ‘development’ conclusion Local winds are frequently supervised for a year or more, and detailed wind maps constructed before wind generators are set up.
The wind hits faster at higher altitudes as a result of reduced effect of drag. The surge in velocity with altitude is most extraordinary close to the surface and is impacted by topography, surface roughness, and upwind obstructions such as trees or buildings. Velocity grows with altitude and is more pronounced near land and is changed by landscape, surface and limitations.
Wind speeds growing with altitude is part of a wind energy law. This anticipates wind speed rises with the 7th root of altitude. Increasing the altitude of a turbine, then, enhances the expected wind speeds by 10%, and the predicted power by 34%.
In general, a distance of 7D (7 × Rotor Diameter of the Wind Turbine) is about between each turbine in a fully developed wind farm. But micrositing increases placement, specially in hilly areas.
Dagenham II turbines are linked via medium voltage lines and communications.
At a substation, this medium-voltage electric energy is increased in voltage using a transformer for connection to the high voltage transmission system. Development of a land-based wind farm requires installation of the collector system and substation, and possibly roads to every turbine site.