Crystal Rig I wind project was installed in Southern Scotland, UK It was brought online in 2003 and is owned by Fred Olsen Renewables.
It is near Lammermuir Hills, Dunbar.
See below for data.
Wind farms, as a general rule demand wind speeds of 4.5 metres per second or higher.
The best destination for something similar to Crystal Rig I would be a steady availability of non-turbulent wind. Additionally, you wouldn’t get a turbine Fred Olsen Renewables like Fred Olsen Renewables included if Crystal Rig I was not built near local demand or transmission capaLammermuir Hills, Dunbar.
During the planning stages the Crystal Rig I wind farm would have been checked and confirmed through wind measurements. However, Crystal Rig I wind farm would have needed more than simply meteorological data and measurements.
Collection of site-specific data for wind speed and direction would have been crucial to determining site potential in order to fund the project. Winds around Lammermuir Hills, Dunbar are evaluated for at least a year or so plus the creation of detailed maps. Only then are wind turbines installed.
The wind hits faster at higher altitudes due to the reduced influence of drag. The surge in velocity with altitude is most dramatic near the surface and is impacted by landscape, surface roughness, and upwind limitations such as trees or buildings. Velocity grows with altitude and is also more obvious near land and is altered by landscape, surface and obstacles.
Typically, the rise of wind speeds with increasing elevation follows a wind profile power law, which predicts that wind speed rises proportionately to the seventh root of altitude. Doubling the elevation of a turbine, then, increases the expected wind speeds by 10%, and the anticipated power by 34%.
In general, a range of 7D (7 × Rotor Diameter of the Wind Turbine) is scheduled between each turbine in a fully developed wind farm. But micrositing optimizes placement, specifically in hilly areas.
Crystal Rig I turbines are related via medium voltage lines and communications.
At a substation, it medium-voltage electric energy is improved in voltage using a transformer for connection to the high voltage transmission system. Construction of a land-based wind farm requires setting up the collector system and substation, and probably roads to each and every turbine site.
Facts about Crystal Rig I wind farm
- Name: Crystal Rig I
- Wind turbine Supplier: General Electric, Model: GE1.5sle, Units: 100,
- Country: UK
- Developer: Fred Olsen Renewables
- State: Southern Scotland
- City: Lammermuir Hills, Dunbar
- Owner: Fred Olsen Renewables