Cotton Farm wind farm is located in Eastern England, UK. It was in fact brought online in 2013 and is owned by Renerco.
It is near Cambridgeshire.
See below for data.
As a general rule, economic wind machines require a wind speed of 4.5 m/s (16 km/h) or higher.
The very best destination for something like Cotton Farm would be a steady availability of non-turbulent wind. Additionally, you would not get a turbine Renerco like Renerco included if Cotton Farm was not built near local demand or transmission capaCambridgeshire.
During the planning stages the Cotton Farm wind farm would have been checked and validated through wind measurements. Meteorological wind data alone is usually not adequate for accurate siting of a large wind power project.
Collection of site-specific data for wind speed and direction might have been important to determining site potential to be able to fund the project. Local winds are frequently examined for a year or more, and detailed wind maps made before wind generators are installed.
Altitude would also possess a part to performwithin a project like Cotton Farm. This is due to drag The surge in velocity with altitude is most extraordinary near the surface and is affected by topography, surface roughness, and upwind limitations such as trees or buildings. Velocity boosts with altitude and it is more evident near land and is altered by landscape, surface and hurdles.
Wind speeds growing with altitude is part of a wind energy law. This predicts wind speed rises with the 7th root of altitude. Increasing the height of a turbine, then, boosts the predicted wind speeds by 10%, and the estimated power by 34%.
In general, a distance of 7D (7 × Rotor Diameter of the Wind Turbine) is set between each turbine in a fully developed wind farm. But this may not be the situation in hilly areas.
Individual turbines at Cotton Farm are connected with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, that medium-voltage electric energy is enhanced in voltage using a transformer for connection to the high voltage transmission system. Construction of a land-based wind farm requires installing of the collector system and substation, and probably roads to each and every turbine site.
Facts about Cotton Farm wind farm
- Name: Cotton Farm
- Wind turbine Supplier: Vestas Wind Systems, Model: V90/2000, Units: 2,
- Country: UK
- State: Eastern England
- City: Cambridgeshire
- Owner: Renerco