Caton Moor wind farm is located in North West England, UK. It was in fact brought online in 2006 and is owned by Triodos Renewables.
It is near Lancashire.
See below for data.
Generally speaking, economic wind machines require a wind speed of 4.5 m/s (16 km/h) or bigger.
The best location for something such as Caton Moor would be a steady availability of non-turbulent wind. Additionally, you would not get a turbine Triodos Renewables like Triodos Renewables involved if Caton Moor was not built near local demand or transmission capaLancashire.
During the planning stages the Caton Moor wind farm would’ve been checked and authenticated through wind measurements. Meteorological wind data alone is usually not ample for correct siting of a large wind power project.
Site info around Lancashire would have been a major element in the ‘development’ conclusion Winds around Lancashire are examined for over a year or so alongside the development of detailed maps. Only then are wind turbines installed.
Altitude would also possess a part to performwithin a project like Caton Moor. This is due to drag The rise in velocity with altitude is most extraordinary close to the surface and is affected by topography, surface roughness, and upwind limitations such as trees or buildings. Velocity grows with altitude and it is more distinct near land and is altered by geography, surface and hurdles.
Almost always, the growth of wind speeds with raising height follows a wind profile power law, which anticipates that wind speed rises proportionately to the seventh root of altitude. Increasing the elevation of a turbine, then, raises the predicted wind speeds by 10%, and the predicted power by 34%.
In general, a distance of 7D (7 × Rotor Diameter of the Wind Turbine) is defined between each turbine in a fully developed wind farm. But micrositing optimizes placement, particularly in hilly areas.
Caton Moor turbines are connected via medium voltage lines and communications.
At a substation, that medium-voltage electric current is enhanced in voltage using a transformer for connection to the high voltage transmission system. Building of a land-based wind farm requires installation of the collector system and substation, and perhaps access roads to each and every turbine site.
Facts about Caton Moor wind farm
- Name: Caton Moor
- Wind turbine Supplier: Vestas Wind Systems, Model: V90/3000, Units: 20,
- Country: UK
- Developer: Hainsford Developments
- State: North West England
- City: Lancashire
- Owner: Triodos Renewables