Burradale Phase 2 wind project was installed in Northern Scotland, UK It was brought online in 2003 and is owned by Shetland Aerogenerators.
It is near Shetland Islands.
See below for data.
Wind farms, as a general rule demand wind speeds of 4.5 metres per second or higher.
The best location for something like Burradale Phase 2 would be a steady supply of non-turbulent wind. Additionally, you wouldn’t get a turbine Shetland Aerogenerators like Shetland Aerogenerators included if Burradale Phase 2 was not built near local demand or transmission capaShetland Islands.
Before building, Burradale Phase 2 was most likely screened on the foundation of a wind atlas, and validated with wind measurements. However, Burradale Phase 2 wind farm might have needed more than just meteorological data and measurements.
Site information around Shetland Islands would have been a major factor in the development decision Winds around Shetland Islands are evaluated for over a year or so alongside the creation of detailed maps. Only then are wind turbines installed.
Altitude would also possess a part to performwithin a project like Burradale Phase 2. This is because of drag The rise in velocity with altitude is most spectacular near the surface and is affected by landscape, surface roughness, and upwind hurdles such as trees or buildings. Velocity boosts with altitude and it is more pronounced near land and is altered by landscape, surface and obstacles.
Wind speeds increasing with altitude is part of a wind energy law. This Northern Scotlands wind speed rises with the 7th root of altitude. Increasing the elevation of a turbine, then, enhances the anticipated wind speeds by 10%, and the predicted power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they are spaced out so they don’t affect one another. However this might not be the case in hilly areas.
Burradale Phase 2 turbines are related via medium voltage lines and communications.
At a substation, this particular medium-voltage electric energy is elevated in voltage using a transformer for connection to the high voltage transmission system. Construction of a land-based wind farm requires installing of the collector system and substation, and perhaps roads to every turbine site.