Burnthouse Farm wind farm is located in Eastern England, UK. It was created in 2013 and is owned by .
It is near Cambridgeshire, Eastern England.
See below for data.
Wind farms, as a general rule demand wind speeds of 4.5 metres per second or higher.
A perfect location for a project like Burnthouse Farm would have a near constant flow of non-turbulent wind year round, having a minimum likelihood of sudden effective bursts of wind. Additionally, you would not get a turbine like included if Burnthouse Farm was not built near local demand or transmission capaCambridgeshire, Eastern England.
Before construction, Burnthouse Farm was most likely screened on the foundation of a wind atlas, and validated with wind specifications. Meteorological wind data alone is usually not ample for exact siting of a large wind power project.
Assortment of site-specific data for wind speed and direction could have been crucial to determining site potential in order to finance the project. Winds around Cambridgeshire, Eastern England are analysed for over a year or so plus the creation of detailed maps. Only then are wind turbines installed.
Altitude would also possess a part to playwithin a project like Burnthouse Farm. This is due to drag The boost in velocity with altitude is most extraordinary near the surface and is affected by topography, surface roughness, and upwind obstructions such as trees or buildings. Velocity rises with altitude and it is more distinct near land and is altered by terrain, surface and hurdles.
Typically, the rise of wind speeds with growing elevation follows a wind profile power law, which forecasts that wind speed rises proportionately to the seventh root of altitude. Increasing the elevation of a turbine, then, raises the expected wind speeds by 10%, and the estimated power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they’re spaced out so that they don’t affect one another. But micrositing maximizes placement, particularly in hilly areas.
Individual turbines at Burnthouse Farm are interconnected with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, this medium-voltage electric current is improved in voltage with a transformer for link with the high voltage transmission system. Building of a land-based wind farm requires installation of the collector system and substation, and perhaps access roads to each turbine site.
Facts about Burnthouse Farm wind farm
- Name: Burnthouse Farm
- Wind turbine Supplier: Senvion, Model: MM82-2MW, Units: 13,
- Country: UK
- Developer: REG Windpower
- State: Eastern England
- City: Cambridgeshire, Eastern England