Burnfoot Hill Extension wind farm is located in Central Scotland, UK. It was finished in 2014 and is owned by .
It is near Ochil Hills, Clackmannanshire and Perth & Kinross.
See below for data.
For the most part, economic wind power generators require a wind speed of 4.5 m/s (16 km/h) or higher.
The best destination for something like Burnfoot Hill Extension is a steady supply of non-turbulent wind. Additionally, you wouldn’t get a turbine like associated if Burnfoot Hill Extension was not built near local demand or transmission capaOchil Hills, Clackmannanshire and Perth & Kinross.
During the planning stages the Burnfoot Hill Extension wind farm would have been checked and authenticated through wind measurements. Meteorological wind data alone is usually not ample for exact siting of a large wind power project.
Collection of site-specific data for wind speed and direction would have been essential to determining site potential as a way to fund the project. Local winds are often watched for a year or more, and detailed wind maps constructed before wind generators are set up.
Altitude would also possess a part to performin a project like Burnfoot Hill Extension. This is because of drag The rise in velocity with altitude is most remarkable at the surface and is impacted by landscape, surface roughness, and upwind hurdles such as trees or buildings. Velocity grows with altitude and is also more distinct near land and is changed by terrain, surface and obstacles.
Normally, the increase of wind speeds with increasing elevation follows a wind profile power law, which anticipates that wind speed rises proportionately to the seventh root of altitude. Increasing the elevation of a turbine, then, raises the anticipated wind speeds by 10%, and the anticipated power by 34%.
In general, a distance of 7D (7 × Rotor Diameter of the Wind Turbine) is set between each turbine in a fully developed wind farm. But this may not be the situation in hilly areas.
Individual turbines at Burnfoot Hill Extension are interlocked with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, this medium-voltage electric energy is elevated in voltage using a transformer for connection to the high voltage transmission system. Building of a land-based wind farm requires installing of the collector system and substation, and possibly roads to every turbine site.
Facts about Burnfoot Hill Extension wind farm
- Name: Burnfoot Hill Extension
- Wind turbine Supplier: Emergya Wind Technologies (EWT), Model: DW52/54 – 500kW, Units: 1,
- Country: UK
- Developer: Wind Prospect
- State: Central Scotland
- City: Ochil Hills, Clackmannanshire and Perth & Kinross