Burnbrae Farm wind project was set up in Southern Scotland, UK It was brought online in 2014 and is owned by .
It is near Limekilnburn, South Lanarkshire.
See below for data.
As a rule, economic wind machines require a wind speed of 4.5 m/s (16 km/h) or more.
The best location for a project like Burnbrae Farm would have a near constant flow of non-turbulent wind throughout the year, having a minimum chances of sudden potent bursts of wind. An essential aspect of turbine siting is also admittance to local requirement or transmission capaLimekilnburn, South Lanarkshire.
During the planning stages the Burnbrae Farm wind farm would have been checked and confirmed through wind measurements. Meteorological wind data alone is usually not sufficient for correct siting of a large wind power project.
Site information around Limekilnburn, South Lanarkshire is a major element in the development final decision Winds around Limekilnburn, South Lanarkshire are examined for over a year or so alongside the creation of detailed maps. Only then are wind turbines installed.
The wind hits faster at greater altitudes due to the reduced influence of drag. The boost in velocity with altitude is most spectacular at the surface and is affected by landscape, surface roughness, and upwind hurdles such as trees or buildings. Velocity boosts with altitude and is also more obvious near land and is changed by landscape, surface and obstructions.
Wind speeds escalating with altitude is part of a wind energy law. This forecasts wind speed rises with the 7th root of altitude. Doubling the height of a turbine, then, boosts the anticipated wind speeds by 10%, and the anticipated power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they’re spaced out to make sure they don’t affect one another. But micrositing maximizes placement, specifically in hilly areas.
Burnbrae Farm turbines are connected via medium voltage lines and communications.
At a substation, this particular medium-voltage electric current is improved in voltage with a transformer for connection to the high voltage transmission system. Building of a land-based wind farm requires installation of the collector system and substation, and probably access roads to every turbine site.
Facts about Burnbrae Farm wind farm
- Name: Burnbrae Farm
- Wind turbine Supplier: General Electric, Model: GE1.5sle, Units: 13,
- Country: UK
- Developer: Infinergy
- State: Southern Scotland
- City: Limekilnburn, South Lanarkshire