Bristol Port Extension wind farm is located in South West England, UK. It was in fact brought online in 2014 and is owned by .
It is near Land at Avonmouth Docks (Adj to River Avon), St Andrews Road, Avonmouth, BS11 9DQ.
See below for data.
As a general rule, economic wind machines require a wind speed of 4.5 m/s (16 km/h) or greater.
A great location for a project like Bristol Port Extension could have a near constant flow of non-turbulent wind year round, having a minimum probability of sudden effective bursts of wind. An essential aspect of turbine siting is furthermore access to local demand or transmission capaLand at Avonmouth Docks (Adj to River Avon), St Andrews Road, Avonmouth, BS11 9DQ.
During the planning stages the Bristol Port Extension wind farm would have been checked and confirmed through wind measurements. However, Bristol Port Extension wind farm would have needed more than simply meteorological data and measurements.
Site info around Land at Avonmouth Docks (Adj to River Avon), St Andrews Road, Avonmouth, BS11 9DQ would have been a major element in the ‘development’ final decision Local winds are frequently monitored for a year or more, and comprehensive wind maps made before wind generators are installed.
The wind blows quicker at greater altitudes due to the reduced effect of drag. The increase in velocity with altitude is most extraordinary close to the surface and is impacted by geography, surface roughness, and upwind obstacles such as trees or buildings. Velocity rises with altitude and is more obvious near land and is altered by geography, surface and obstacles.
Commonly, the increase of wind speeds with raising elevation follows a wind profile power law, which predicts that wind speed rises proportionately to the seventh root of altitude. Doubling the altitude of a turbine, then, increases the anticipated wind speeds by 10%, and the estimated power by 34%.
In general, a distance of 7D (7 × Rotor Diameter of the Wind Turbine) is scheduled between each turbine in a fully developed wind farm. But this isn’t necessarily the case in hilly areas.
Individual turbines at Bristol Port Extension are connected with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, it medium-voltage electric current is improved in voltage using a transformer for connection to the high voltage transmission system. Building of a land-based wind farm requires installing of the collector system and substation, and perhaps access roads to each and every turbine site.
Facts about Bristol Port Extension wind farm
- Name: Bristol Port Extension
- Wind turbine Supplier: PowerWind, Model: 56/900, Units: 5,
- Country: UK
- Developer: Ecotricity
- State: South West England
- City: Land at Avonmouth Docks (Adj to River Avon), St Andrews Road, Avonmouth, BS11 9DQ