Boundary Lane wind farm is situated in North East England, UK. It was in fact brought online in 2013 and is owned by EDF Renewable Services.
It is near Boundary Lane, located to the south west of Newcastle.
See below for data.
In most cases, economic wind turbines require a wind speed of 4.5 m/s (16 km/h) or larger.
An ideal place for a project like Boundary Lane might have a near constant flow of non-turbulent wind all year round, having a minimum chance of sudden effective bursts of wind. An important factor of turbine siting is moreover admittance to local requirement or transmission capaBoundary Lane, located to the south west of Newcastle.
During the planning stages the Boundary Lane wind farm would’ve been checked and endorsed through wind measurements. However, Boundary Lane wind farm might have needed more than simply meteorological data and measurements.
Assortment of site-specific data for wind speed and direction would have been imperative to determining site potential in order to finance the project. Local winds are frequently checked for a year or more, and detailed wind maps created before wind generators are installed.
Altitude would also have a part to performin a project like Boundary Lane. This is due to drag The boost in velocity with altitude is most extraordinary at the surface and is affected by topography, surface roughness, and upwind hurdles such as trees or buildings. Velocity grows with altitude and it is more distinct near land and is altered by topography, surface and obstacles.
Typically, the rise of wind speeds with raising elevation follows a wind profile power law, which forecasts that wind speed rises proportionately to the seventh root of altitude. Increasing the elevation of a turbine, then, increases the predicted wind speeds by 10%, and the estimated power by 34%.
In general, a length of 7D (7 × Rotor Diameter of the Wind Turbine) is about between each turbine in a fully developed wind farm. But micrositing optimizes placement, specifically in hilly areas.
Individual turbines at Boundary Lane are interconnected with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, it medium-voltage electric energy is enhanced in voltage using a transformer for connection to the high voltage transmission system. Building of a land-based wind farm requires installation of the collector system and substation, and probably access roads to each turbine site.
Facts about Boundary Lane wind farm
- Name: Boundary Lane
- Wind turbine Supplier: Nordex, Model: N80_2500kW, Units: 3,
- Country: UK
- Developer: Wind Prospect
- State: North East England
- City: Boundary Lane, located to the south west of Newcastle
- Owner: EDF Renewable Services