Blantyre Muir wind farm is located in Southern Scotland, UK. It was completed in 2014 and is owned by .
It is near Near Laigh Muirhouses Farm, Muttonhole Road, Hamilton,South Lanarkshire.
See below for data.
Wind farms, as a general rule demand wind speeds of 4.5 metres per second or more.
A great position for a project like Blantyre Muir might have a near constant flow of non-turbulent wind all year round, with a minimum likelihood of sudden powerful bursts of wind. Additionally, you wouldn’t get a turbine like involved if Blantyre Muir was not built near local demand or transmission capaNear Laigh Muirhouses Farm, Muttonhole Road, Hamilton,South Lanarkshire.
During the planning stages the Blantyre Muir wind farm would’ve been checked and validated through wind measurements. However, Blantyre Muir wind farm might have needed more than just meteorological data and measurements.
Site data around Near Laigh Muirhouses Farm, Muttonhole Road, Hamilton,South Lanarkshire is a major aspect in the development final decision Winds around Near Laigh Muirhouses Farm, Muttonhole Road, Hamilton,South Lanarkshire are analysed for over a year or so alongside the creation of detailed maps. Only then are wind turbines installed.
Altitude would also have a part to performwithin a project like Blantyre Muir. This is due to drag The rise in velocity with altitude is most spectacular at the surface and is impacted by landscape, surface roughness, and upwind obstructions such as trees or buildings. Velocity grows with altitude and is also more pronounced near land and is altered by terrain, surface and limitations.
Wind speeds escalating with altitude is part of a wind energy law. This anticipates wind speed rises with the 7th root of altitude. Doubling the height of a turbine, then, increases the anticipated wind speeds by 10%, and the expected power by 34%.
In general, a length of 7D (7 × Rotor Diameter of the Wind Turbine) is set between each turbine in a fully developed wind farm. But micrositing increases placement, particularly in hilly areas.
Individual turbines at Blantyre Muir are connected with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, that medium-voltage electric current is improved in voltage with a transformer for link with the high voltage transmission system. Building of a land-based wind farm requires setting up the collector system and substation, and probably access roads to every turbine site.