Biggleswade wind project was set up in South East England, UK It was in fact brought online in 2013 and is owned by .
It is near Bedfordshire.
See below for data.
As a rule, economic wind turbines require a wind speed of 4.5 m/s (16 km/h) or bigger.
The best location for something similar to Biggleswade would be a steady supply of non-turbulent wind. An essential aspect of turbine siting is furthermore admittance to local demand or transmission capaBedfordshire.
During the planning stages the Biggleswade wind farm would’ve been checked and confirmed through wind measurements. Meteorological wind data alone is usually not adequate for accurate siting of a large wind power project.
Assortment of site-specific data for wind speed and direction would have been crucial to determining site potential in order to fund the project. Local winds are often checked for a year or more, and comprehensive wind maps built before wind generators are set up.
The wind blows faster at greater altitudes because of the reduced effect of drag. The boost in velocity with altitude is most spectacular at the surface and is impacted by topography, surface roughness, and upwind hurdles such as trees or buildings. Velocity boosts with altitude and it is more obvious near land and is transformed by landscape, surface and obstacles.
Usually, the rise of wind speeds with growing height follows a wind profile power law, which anticipates that wind speed rises proportionately to the seventh root of altitude. Doubling the height of a turbine, then, boosts the anticipated wind speeds by 10%, and the predicted power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they’re spaced out so that they don’t affect one another. However this isn’t necessarily the situation in hilly areas.
Individual turbines at Biggleswade are interlocked with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, this particular medium-voltage electric energy is increased in voltage with a transformer for link with the high voltage transmission system. Building of a land-based wind farm requires installation of the collector system and substation, and possibly roads to every turbine site.
Facts about Biggleswade wind farm
- Name: Biggleswade
- Wind turbine Supplier: Vestas Wind Systems, Model: 1.65MW, Units: 4,
- Country: UK
- State: South East England
- City: Bedfordshire