Berry Burn wind farm is situated in Northern Scotland, UK. It was created in 2014 and is owned by Statkraft.
It is near Near Inverness.
See below for data.
As a rule, economic wind generators require a wind speed of 4.5 m/s (16 km/h) or greater.
The best destination for something such as Berry Burn is a steady supply of non-turbulent wind. An important factor of turbine siting is moreover access to local requirement or transmission capaNear Inverness.
Before building, Berry Burn was probably screened on the basis of a wind atlas, and validated with wind specifications. Meteorological wind data alone is usually not ample for correct siting of a large wind power project.
Assortment of site-specific data for wind speed and direction might have been vital to determining site potential as a way to fund the project. Winds around Near Inverness are examined for over a year or so plus the introduction of detailed maps. Only then are wind turbines installed.
Altitude would also have a part to performwithin a project like Berry Burn. This is due to drag The surge in velocity with altitude is most extraordinary close to the surface and is impacted by landscape, surface roughness, and upwind limitations such as trees or buildings. Velocity rises with altitude and it is more pronounced near land and is altered by geography, surface and obstructions.
Wind speeds increasing with altitude is part of a wind energy law. This anticipates wind speed rises with the 7th root of altitude. Doubling the elevation of a turbine, then, raises the anticipated wind speeds by 10%, and the expected power by 34%.
In general, a distance of 7D (7 × Rotor Diameter of the Wind Turbine) is scheduled between each turbine in a fully developed wind farm. But micrositing optimizes placement, specially in hilly areas.
Berry Burn turbines are related via medium voltage lines and communications.
At a substation, this particular medium-voltage electric current is improved in voltage using a transformer for link with the high voltage transmission system. Development of a land-based wind farm requires installation of the collector system and substation, and probably roads to each turbine site.