Beckton Sewage Treatment Works wind project was installed in South East England, UK It was brought online in 2013 and is owned by .
It is near London,Jenkins Lane, East Ham.
See below for data.
For the most part, economic wind power generators require a wind speed of 4.5 m/s (16 km/h) or bigger.
The best location for something similar to Beckton Sewage Treatment Works is a steady availability of non-turbulent wind. An important factor of turbine siting is also admittance to local requirement or transmission capaLondon,Jenkins Lane, East Ham.
Before construction, Beckton Sewage Treatment Works was probably screened on the foundation of a wind atlas, and validated with wind measurements. Meteorological wind data alone is usually not adequate for exact siting of a large wind power project.
Assortment of site-specific data for wind speed and direction would have been important to determining site potential to be able to fund the project. Winds around London,Jenkins Lane, East Ham are analysed for at least a year or so alongside the development of detailed maps. Only then are wind turbines installed.
Altitude would also possess a part to playin a project like Beckton Sewage Treatment Works. This is because of drag The increase in velocity with altitude is most extraordinary at the surface and is affected by topography, surface roughness, and upwind hurdles such as trees or buildings. Velocity boosts with altitude and is also more obvious near land and is changed by topography, surface and obstructions.
Ordinarily, the increase of wind speeds with increasing height follows a wind profile power law, which predicts that wind speed rises proportionately to the seventh root of altitude. Increasing the altitude of a turbine, then, raises the expected wind speeds by 10%, and the estimated power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they are spaced out in order that they don’t affect each other. But micrositing increases placement, specifically in hilly areas.
Beckton Sewage Treatment Works turbines are connected via medium voltage lines and communications.
At a substation, this medium-voltage electric energy is enhanced in voltage with a transformer for link with the high voltage transmission system. Development of a land-based wind farm requires setting up the collector system and substation, and probably access roads to each and every turbine site.
Facts about Beckton Sewage Treatment Works wind farm
- Name: Beckton Sewage Treatment Works
- Wind turbine Supplier: Wobben Windpower, Model: E48/800, Units: 32,
- Country: UK
- Developer: Thames Water
- State: South East England
- City: London,Jenkins Lane, East Ham