Barmoor wind project was installed in North East England, UK It was created in 2015 and is owned by EDF Energy.
It is near 14km south west of Berwick-Upon-Tweed, Northumberland.
See below for data.
Wind farms, as a general rule demand wind speeds of 4.5 metres per second or more.
The best destination for something similar to Barmoor would be a steady availability of non-turbulent wind. An essential aspect of turbine siting is moreover admittance to local requirement or transmission capa14km south west of Berwick-Upon-Tweed, Northumberland.
During the planning stages the Barmoor wind farm would have been checked and endorsed through wind measurements. However, Barmoor wind farm might have needed more than just meteorological data and measurements.
Collection of site-specific data for wind speed and direction would have been crucial to determining site potential to be able to fund the project. Local winds are often supervised for a year or more, and comprehensive wind maps constructed before wind generators are set up.
Altitude would also have a part to playwithin a project like Barmoor. This is because of drag The surge in velocity with altitude is most spectacular at the surface and is impacted by geography, surface roughness, and upwind obstacles such as trees or buildings. Velocity rises with altitude and is more evident near land and is altered by terrain, surface and obstacles.
Wind speeds increasing with altitude is part of a wind energy law. This anticipates wind speed rises with the 7th root of altitude. Increasing the elevation of a turbine, then, enhances the predicted wind speeds by 10%, and the predicted power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they are spaced out so they really don’t affect one another. However this may not be the way it is in hilly areas.
Barmoor turbines are linked via medium voltage lines and communications.
At a substation, it medium-voltage electric energy is improved in voltage with a transformer for connection to the high voltage transmission system. Building of a land-based wind farm requires setting up the collector system and substation, and probably access roads to every turbine site.
Facts about Barmoor wind farm
- Name: Barmoor
- Wind turbine Supplier: Senvion, Model: MM92 2.05MW, Units: 4,
- Country: UK
- Developer: Force 9 Energy, Duke Energy, Statkraft
- State: North East England
- City: 14km south west of Berwick-Upon-Tweed, Northumberland
- Owner: EDF Energy