Bankend Rig wind farm is located in Southern Scotland, UK. It was created in 2013 and is owned by .
It is near Glengavel, nr Drumclog.
See below for data.
As a rule, economic wind machines require a wind speed of 4.5 m/s (16 km/h) or greater.
The very best location for something like Bankend Rig would be a steady availability of non-turbulent wind. Additionally, you wouldn’t get a turbine like associated if Bankend Rig was not built near local demand or transmission capaGlengavel, nr Drumclog.
During the planning stages the Bankend Rig wind farm would’ve been checked and endorsed through wind measurements. However, Bankend Rig wind farm would have needed more than just meteorological data and measurements.
Site data around Glengavel, nr Drumclog would have been a major factor in the ‘development’ choice Local winds are frequently monitored for a year or more, and detailed wind maps constructed before wind generators are installed.
The wind blows more rapidly at higher altitudes due to the reduced effect of drag. The increase in velocity with altitude is most remarkable near the surface and is impacted by landscape, surface roughness, and upwind hurdles such as trees or buildings. Velocity increases with altitude and is more distinct near land and is changed by landscape, surface and hurdles.
Commonly, the growth of wind speeds with raising height follows a wind profile power law, which forecasts that wind speed rises proportionately to the seventh root of altitude. Doubling the elevation of a turbine, then, increases the expected wind speeds by 10%, and the estimated power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they are spaced out so that they don’t affect one another. But micrositing maximizes placement, specially in hilly areas.
Bankend Rig turbines are connected via medium voltage lines and communications.
At a substation, this kind of medium-voltage electric current is enhanced in voltage with a transformer for link with the high voltage transmission system. Building of a land-based wind farm requires installation of the collector system and substation, and perhaps roads to each and every turbine site.