Bambers 2 wind project was installed in Eastern England, UK It was in fact brought online in 2006 and is owned by Ecotricity.
It is near Sewage Treatment Works, Mablethorpe, Lincolnshire.
See below for data.
Wind farms, as a general rule call for wind speeds of 4.5 metres per second or higher.
A perfect position for a project like Bambers 2 would have a near constant flow of non-turbulent wind all year long, with a minimum likelihood of sudden effective bursts of wind. An essential aspect of turbine siting is also admittance to local requirement or transmission capaSewage Treatment Works, Mablethorpe, Lincolnshire.
During the planning stages the Bambers 2 wind farm would have been checked and validated through wind measurements. However, Bambers 2 wind farm would have needed more than simply meteorological data and measurements.
Collection of site-specific data for wind speed and direction would have been essential to determining site potential in order to fund the project. Winds around Sewage Treatment Works, Mablethorpe, Lincolnshire are evaluated for at least a year or so alongside the introduction of detailed maps. Only then are wind turbines installed.
Altitude would also have a part to playin a project like Bambers 2. This is due to drag The boost in velocity with altitude is most spectacular at the surface and is affected by topography, surface roughness, and upwind obstructions such as trees or buildings. Velocity rises with altitude and is also more pronounced near land and is altered by landscape, surface and obstacles.
Commonly, the rise of wind speeds with raising elevation follows a wind profile power law, which predicts that wind speed rises proportionately to the seventh root of altitude. Doubling the elevation of a turbine, then, boosts the anticipated wind speeds by 10%, and the predicted power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they are spaced out so that they don’t affect each other. However this is not always the way it is in hilly areas.
Individual turbines at Bambers 2 are interconnected with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, this kind of medium-voltage electric current is improved in voltage with a transformer for connection to the high voltage transmission system. Development of a land-based wind farm requires installation of the collector system and substation, and perhaps roads to each turbine site.
Facts about Bambers 2 wind farm
- Name: Bambers 2
- Wind turbine Supplier: Enercon, Model: E-82 / 2300 kW, Units: 14,
- Country: UK
- Developer: Ecotricity
- State: Eastern England
- City: Sewage Treatment Works, Mablethorpe, Lincolnshire
- Owner: Ecotricity