Balnamoon Farm wind project was set up in Northern Scotland, UK It was created in 2009 and is owned by .
It is near Moray.
See below for data.
Wind farms, as a general rule demand wind speeds of 4.5 metres per second or higher.
An ideal position for a project like Balnamoon Farm might have a near constant flow of non-turbulent wind throughout the year, with a minimum likelihood of abrupt effective bursts of wind. Additionally, you wouldn’t get a turbine like associated if Balnamoon Farm was not built near local demand or transmission capaMoray.
During the planning stages the Balnamoon Farm wind farm would’ve been checked and authenticated through wind measurements. Meteorological wind data alone is usually not adequate for correct siting of a large wind power project.
Site information around Moray would have been a major aspect in the ‘development’ final decision Local winds are often supervised for a year or more, and comprehensive wind maps built before wind generators are installed.
Altitude would also have a part to playin a project like Balnamoon Farm. This is because of drag The rise in velocity with altitude is most spectacular close to the surface and is impacted by landscape, surface roughness, and upwind obstacles such as trees or buildings. Velocity boosts with altitude and it is more distinct near land and is altered by topography, surface and limitations.
Wind speeds increasing with altitude is part of a wind energy law. This predicts wind speed rises with the 7th root of altitude. Doubling the altitude of a turbine, then, enhances the predicted wind speeds by 10%, and the estimated power by 34%.
In general, a length of 7D (7 × Rotor Diameter of the Wind Turbine) is scheduled between each turbine in a fully developed wind farm. However this is not always the situation in hilly areas.
Individual turbines at Balnamoon Farm are interlocked with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, that medium-voltage electric energy is enhanced in voltage with a transformer for connection to the high voltage transmission system. Construction of a land-based wind farm requires setting up the collector system and substation, and perhaps access roads to each and every turbine site.
Facts about Balnamoon Farm wind farm
- Name: Balnamoon Farm
- Wind turbine Supplier: Enercon, Model: E70/2000, Units: 21,
- Country: UK
- Developer: Balnamoon Renewables Ltd
- State: Northern Scotland
- City: Moray