Ardkinglass/Clachan Flats wind farm is situated in Northern Scotland, UK. It was completed in 2010 and is owned by Iberdrola.
It is near near Cairndow, Argyll and Bute.
See below for data.
In most cases, economic wind machines require a wind speed of 4.5 m/s (16 km/h) or greater.
The best position for a project like Ardkinglass/Clachan Flats might have a near constant flow of non-turbulent wind throughout the year, with a minimum chances of abrupt effective bursts of wind. An important factor of turbine siting is furthermore admission to local requirement or transmission capanear Cairndow, Argyll and Bute.
During the planning stages the Ardkinglass/Clachan Flats wind farm would’ve been checked and confirmed through wind measurements. Meteorological wind data alone is usually not ample for correct siting of a large wind power project.
Collection of site-specific data for wind speed and direction might have been vital to determining site potential as a way to fund the project. Local winds are frequently watched for a year or more, and comprehensive wind maps built before wind generators are installed.
The wind hits speedier at greater altitudes because of the reduced influence of drag. The increase in velocity with altitude is most remarkable at the surface and is impacted by topography, surface roughness, and upwind limitations such as trees or buildings. Velocity increases with altitude and it is more pronounced near land and is changed by terrain, surface and obstructions.
Ordinarily, the rise of wind speeds with growing elevation follows a wind profile power law, which forecasts that wind speed rises proportionately to the seventh root of altitude. Doubling the altitude of a turbine, then, enhances the expected wind speeds by 10%, and the estimated power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they are spaced out to make sure they don’t affect each other. But micrositing increases placement, specially in hilly areas.
Individual turbines at Ardkinglass/Clachan Flats are connected with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, it medium-voltage electric energy is increased in voltage using a transformer for link with the high voltage transmission system. Development of a land-based wind farm requires installing of the collector system and substation, and probably roads to each turbine site.
Facts about Ardkinglass/Clachan Flats wind farm
- Name: Ardkinglass/Clachan Flats
- Wind turbine Supplier: Ecotecnia, Model: ECO74/1670, Units: 9,
- Country: UK
- Developer: ScottishPower
- State: Northern Scotland
- City: near Cairndow, Argyll and Bute
- Owner: Iberdrola