Aikengall I wind farm is located in Southern Scotland, UK. It was created in 2009 and is owned by .
It is near Innerwick, 9.5km south of Dunbar, East Lothian.
See below for data.
As a rule, economic wind power generators require a wind speed of 4.5 m/s (16 km/h) or more.
A perfect location for a project like Aikengall I might have a near constant flow of non-turbulent wind year round, with a minimum chance of abrupt effective bursts of wind. Additionally, you wouldn’t get a turbine like involved if Aikengall I was not built near local demand or transmission capaInnerwick, 9.5km south of Dunbar, East Lothian.
Before construction, Aikengall I was probably screened on the basis of a wind atlas, and validated with wind specifications. Meteorological wind data alone is usually not enough for accurate siting of a large wind power project.
Collection of site-specific data for wind speed and direction could have been vital to determining site potential as a way to finance the project. Local winds are often supervised for a year or more, and comprehensive wind maps constructed before wind generators are installed.
The wind hits swifter at greater altitudes as a result of reduced influence of drag. The rise in velocity with altitude is most extraordinary at the surface and is impacted by geography, surface roughness, and upwind hurdles such as trees or buildings. Velocity boosts with altitude and is also more evident near land and is transformed by geography, surface and limitations.
Commonly, the growth of wind speeds with escalating height follows a wind profile power law, which anticipates that wind speed rises proportionately to the seventh root of altitude. Increasing the altitude of a turbine, then, enhances the predicted wind speeds by 10%, and the estimated power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they’re spaced out so they really don’t affect one another. However this isn’t necessarily the case in hilly areas.
Aikengall I turbines are connected via medium voltage lines and communications.
At a substation, it medium-voltage electric energy is increased in voltage using a transformer for link with the high voltage transmission system. Development of a land-based wind farm requires setting up the collector system and substation, and perhaps roads to each turbine site.
Facts about Aikengall I wind farm
- Name: Aikengall I
- Wind turbine Supplier: Vestas Wind Systems, Model: V90/3MW, Units: 16,
- Country: UK
- Developer: Community Windpower
- State: Southern Scotland
- City: Innerwick, 9.5km south of Dunbar, East Lothian