Cesme (Kores) wind project was installed in Aegean Region, Turkey It was completed in 2010 and is owned by Dost Enerji.
It is near Cesme, Izmir.
See below for data.
In most cases, economic wind power generators require a wind speed of 4.5 m/s (16 km/h) or more.
A great place for a project like Cesme (Kores) could have a near constant flow of non-turbulent wind all year long, with a minimum probability of abrupt powerful bursts of wind. An essential aspect of turbine siting is also admission to local demand or transmission capaCesme, Izmir.
Before construction, Cesme (Kores) was most likely screened on the foundation of a wind atlas, and validated with wind specifications. Meteorological wind data alone is usually not adequate for accurate siting of a large wind power project.
Assortment of site-specific data for wind speed and direction could have been imperative to determining site potential to be able to finance the project. Winds around Cesme, Izmir are evaluated for at least a year or so alongside the creation of detailed maps. Only then are wind turbines installed.
Altitude would also have a part to playwithin a project like Cesme (Kores). This is because of drag The rise in velocity with altitude is most spectacular near the surface and is impacted by landscape, surface roughness, and upwind hurdles such as trees or buildings. Velocity rises with altitude and is more distinct near land and is transformed by topography, surface and hurdles.
Ordinarily, the growth of wind speeds with growing elevation follows a wind profile power law, which predicts that wind speed rises proportionately to the seventh root of altitude. Doubling the altitude of a turbine, then, increases the expected wind speeds by 10%, and the expected power by 34%.
In general, a distance of 7D (7 × Rotor Diameter of the Wind Turbine) is set between each turbine in a fully developed wind farm. But micrositing increases placement, particularly in hilly areas.
Individual turbines at Cesme (Kores) are interconnected with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, this medium-voltage electric current is elevated in voltage using a transformer for connection to the high voltage transmission system. Building of a land-based wind farm requires installing of the collector system and substation, and probably access roads to each turbine site.
Facts about Cesme (Kores) wind farm
- Name: Cesme (Kores)
- Wind turbine Supplier: Gamesa, Model: G90/2.0 MW, Units: 5,
- Country: Turkey
- Developer: Kores A.Ş.
- State: Aegean Region
- City: Cesme, Izmir
- Owner: Dost Enerji